Montana Car / Permit practice
Montana Car / Permit: Road Signs practice test
Learn the shapes, colors, and meanings of regulatory, warning, and guide signs — from stop and yield to construction and school-zone signs.
Content reviewed against official driver handbooks · August 12, 2026
14 questions · pass with 11 correct. You get instant feedback and an explanation after every answer.
Choose your level
Up to 20 questions on this topic, with feedback after every answer.
Study questions with answers
12 sample Road Signs questions with the correct answer, a short explanation, and the official handbook reference. Read through them, then take the quiz above.
Show all 12 questions with answers
1. You see a sign showing a red circle with a red slash drawn across a black arrow. What is it telling you?
Correct answer: The movement pictured inside the circle is forbidden
The circle-and-slash treatment is the manual's shorthand for a prohibition, so whatever movement the black symbol pictures is the movement you may not make.
Source: Montana Driver Manual — Chapter 3, Signs, Signals, and Road Markings
2. A Range Cattle warning sign is posted because of which condition?
Correct answer: Unfenced land where horses and cattle may wander onto the pavement
This sign marks open country without fencing, where livestock such as cattle and horses are free to walk out onto the traveled surface.
Source: Montana Driver Manual — Chapter 3, Signs, Signals, and Road Markings
3. Orange is the base color for which family of traffic control devices in Montana?
Correct answer: Devices used in construction and maintenance work areas
The manual sets orange aside for the signs, drums, cones, and panels that guide people through areas where crews are building or repairing the road.
Source: Montana Driver Manual — Chapter 3, Signs, Signals, and Road Markings
4. At a school crossing sign marking the spot where children cross the street, what does the manual require?
Correct answer: Stop whenever pedestrians are waiting to cross
Children use this location to reach the far side, so the sign obliges a driver to bring the vehicle to a halt any time someone on foot is waiting to make the crossing.
Source: Montana Driver Manual — Chapter 3, Signs, Signals, and Road Markings
5. A square DO NOT ENTER sign tells you what about the road just ahead?
Correct answer: It runs one way, or vehicles are barred from it entirely
The manual gives this sign two possible meanings: the roadway carries traffic only one way, or no vehicle traffic at all is allowed onto it.
Source: Montana Driver Manual — Chapter 3, Signs, Signals, and Road Markings
6. What does a YIELD sign require of a Montana driver?
Correct answer: Slow to a reasonable speed and let traffic on the road you are entering go first
The manual pairs this sign with two actions: cut your speed to something sensible, then let every vehicle already using the road you are joining go ahead of you.
Source: Montana Driver Manual — Chapter 3, Signs, Signals, and Road Markings
7. What message does a Divided Highway Ends sign carry?
Correct answer: The separate roadways merge into one carrying traffic both ways, so keep right
Beyond this sign the separated roadways come back together into one surface serving both directions of travel, which is why the manual tells drivers to hold to the right.
Source: Montana Driver Manual — Chapter 3, Signs, Signals, and Road Markings
8. The Slippery When Wet warning sign asks a driver to take which combination of actions?
Correct answer: Ease off the speed, avoid hard braking or sharp steering, and lengthen your following gap
Because the surface loses grip once it is damp, the manual pairs three responses: ease off your speed, keep braking and steering gentle, and open up more room to the vehicle ahead.
Source: Montana Driver Manual — Chapter 3, Signs, Signals, and Road Markings
9. Diagonal stripes on a work-zone barricade that slope downward toward the right tell a driver to do what?
Correct answer: Move over toward the right of the barrier
The slope of the stripes points the way traffic is meant to travel, so stripes falling toward the right side steer you to the right of the barrier.
Source: Montana Driver Manual — Chapter 3, Signs, Signals, and Road Markings
10. Which color scheme and shape does Montana normally use for warning signs?
Correct answer: Black lettering on yellow, usually in a diamond outline
The manual assigns warning duty to yellow faces with black lettering, and shapes nearly all of them as diamonds so you can spot the hazard message quickly.
Source: Montana Driver Manual — Chapter 3, Signs, Signals, and Road Markings
11. Among Montana's traffic signs, which one is the only shape built with eight sides?
Correct answer: The stop sign
Only one sign in the manual carries an octagonal outline, so an eight-sided face always calls for a full halt before you move into the intersection ahead.
Source: Montana Driver Manual — Chapter 3, Signs, Signals, and Road Markings
12. Which warning sign is the only round one used on Montana highways?
Correct answer: The sign warning that railroad tracks lie ahead
Warning signs are diamonds with a single exception: the circular sign posted in advance of a place where the highway crosses railroad tracks.
Source: Montana Driver Manual — Chapter 3, Signs, Signals, and Road Markings
More Car / Permit topics
Practice Road Signs in another state
Every Montana question is written from the official Montana driver handbook and checked against its current edition. DMV Test Free is a free, independent study resource — not affiliated with any DMV or government agency. About DMV Test Free