Skip to main content
DMV Test Free

Tennessee CDL — Air Brakes practice

Parking & Stopping

Legal and illegal parking, colored curbs, distances from hydrants and crossings, and how to park safely on hills.

Questions reviewed against the official Tennessee driver handbook · July 7, 2026

7 questions · pass with 6 correct. You get instant feedback and an explanation after every answer.

Study questions with answers

7 sample Parking & Stopping questions with the correct answer, a short explanation, and the official handbook reference. Read through them, then take the quiz above.

  1. 1. On a newer air brake vehicle, how do you set the parking brakes?

    Correct answer: Pull out the yellow diamond-shaped knob

    You apply the parking (spring) brakes by pulling out the yellow, diamond-shaped push-pull control knob, and you release them by pushing it back in.

    Source: Tennessee Commercial Driver's License Manual, Section 5 (Air Brakes) - 5.1.15 Parking Brake Controls

  2. 2. What must you always do before leaving your vehicle unattended?

    Correct answer: Apply the parking brakes or chock the wheels

    You should never leave the vehicle unattended without setting the parking brakes or chocking the wheels, or it could roll away and cause injury and damage.

    Source: Tennessee Commercial Driver's License Manual, Section 5 (Air Brakes) - 5.4.8 Parking Brakes

  3. 3. When making a normal stop with a manual transmission, when should you push in the clutch?

    Correct answer: Only once engine speed has fallen close to idle

    For a smooth normal stop with a manual transmission, wait to push in the clutch until the engine rpm has dropped close to idle, then select a starting gear.

    Source: Tennessee Commercial Driver's License Manual, Section 5 (Air Brakes) - 5.4.1 Normal Stops

  4. 4. How do you test that the parking brake will hold?

    Correct answer: Set it, then in a low gear gently try to ease forward against it

    To check the parking brake, come to a stop, apply it, and in a low gear ease the vehicle forward against it to be sure it holds.

    Source: Tennessee Commercial Driver's License Manual, Section 5 (Air Brakes) - 5.3.3 Final Air Brake Check

  5. 5. Why should you avoid pressing the brake pedal while the spring brakes are already applied?

    Correct answer: The combined spring and air forces could damage the brakes

    Pushing the pedal with the spring brakes on can damage the brakes, because the springs and the air pressure combine to overload them.

    Source: Tennessee Commercial Driver's License Manual, Section 5 (Air Brakes) - 5.1.15 Parking Brake Controls

  6. 6. When should you NOT use the parking brakes to hold the vehicle?

    Correct answer: When the brakes are very hot or very wet in freezing temperatures

    Avoid the parking brakes when the brakes are very hot from a steep grade or very wet in freezing temperatures; instead let hot brakes cool or use wheel chocks, since heat or ice can damage or freeze them.

    Source: Tennessee Commercial Driver's License Manual, Section 5 (Air Brakes) - 5.4.8 Parking Brakes

  7. 7. How often must you empty a manually operated air tank drain valve?

    Correct answer: At the close of each driving day

    A tank fitted with a manual drain, opened with a quarter turn or a pull cable, has to be drained by the driver at the close of each driving day.

    Source: Tennessee Commercial Driver's License Manual, Section 5 (Air Brakes) - 5.1.4 Air Tank Drains

Practice Parking & Stopping in another state

Every Tennessee question is written from the official Tennessee driver handbook and checked against its current edition. DMV Test Free is a free, independent study resource — not affiliated with any DMV or government agency. About DMV Test Free