Skip to main content
DMV Test Free

Oklahoma Car / Permit practice

Oklahoma Car / Permit: Signals & Pavement Markings practice test

How to read traffic signals, lane lines, and pavement markings — including yellow and white lines, arrows, and flashing lights.

Content reviewed against official driver handbooks · August 12, 2026

14 questions · pass with 11 correct. You get instant feedback and an explanation after every answer.

Choose your level

Up to 20 questions on this topic, with feedback after every answer.

Study questions with answers

12 sample Signals & Pavement Markings questions with the correct answer, a short explanation, and the official handbook reference. Read through them, then take the quiz above.

Show all 12 questions with answers
  1. 1. A flashing 'Don't Walk' pedestrian signal tells a person on foot to:

    Correct answer: Not start crossing, but finish if already in the street

    A flashing Don't Walk means do not step off the curb, but keep going if you are already crossing.

    Source: Oklahoma Driver Manual, Chapter 4: Signs, Signals and Markings

  2. 2. A steady yellow traffic light warns a driver to:

    Correct answer: Prepare to stop because red is coming next

    A steady yellow means the light is about to turn red, so stop if you can do so safely before the crosswalk.

    Source: Oklahoma Driver Manual, Chapter 4: Signs, Signals and Markings

  3. 3. A flashing yellow left-turn arrow tells a driver to:

    Correct answer: Turn left only after yielding to oncoming traffic and pedestrians

    It means you may turn left only after yielding to oncoming traffic and pedestrians, who have the right-of-way.

    Source: Oklahoma Driver Manual, Chapter 4: Signs, Signals and Markings

  4. 4. A lighted green arrow at an intersection means a driver may:

    Correct answer: Turn in the arrow's direction even if the red light is lit

    A green arrow allows you to turn in the direction it points, even while the red light is still showing.

    Source: Oklahoma Driver Manual, Chapter 4: Signs, Signals and Markings

  5. 5. When 'Walk' and 'Don't Walk' signals are present at an intersection, pedestrians should:

    Correct answer: Obey the pedestrian signals rather than the traffic light

    Pedestrians must follow the walk signals rather than the vehicle traffic light.

    Source: Oklahoma Driver Manual, Chapter 4: Signs, Signals and Markings

  6. 6. A flashing red traffic light should be obeyed the same way as:

    Correct answer: A stop sign

    A flashing red light has the same meaning as a stop sign; you may go once it is safe to cross.

    Source: Oklahoma Driver Manual, Chapter 4: Signs, Signals and Markings

  7. 7. A left turn on a red light is permitted in Oklahoma when a driver is:

    Correct answer: Turning from one one-way street onto another one-way street, if not prohibited

    After a complete stop you may turn left from a one-way street onto another one-way street, unless signs prohibit the turn.

    Source: Oklahoma Driver Manual, Chapter 4: Signs, Signals and Markings

  8. 8. A broken yellow center line separating opposing traffic means:

    Correct answer: Passing is permitted when it is safe

    Dashed yellow lines separate traffic moving in opposite directions, and passing is permitted when it is safe.

    Source: Oklahoma Driver Manual, Chapter 4: Signs, Signals and Markings

  9. 9. A solid white lane line shows that traffic on both sides moves the same way and that:

    Correct answer: Crossing it to pass is discouraged because it is hazardous

    A solid white line marks lanes going the same direction where crossing to pass is hazardous, such as near intersections.

    Source: Oklahoma Driver Manual, Chapter 4: Signs, Signals and Markings

  10. 10. A flashing yellow traffic light means:

    Correct answer: Slow down and cross carefully, watching both ways

    A flashing yellow light means caution: slow down, check both directions, and drive through carefully.

    Source: Oklahoma Driver Manual, Chapter 4: Signs, Signals and Markings

  11. 11. Dashed white lines on a roadway separate lanes carrying traffic that moves:

    Correct answer: In the same direction

    White dashed lines divide lanes of traffic flowing in the same direction, and passing is allowed when safe.

    Source: Oklahoma Driver Manual, Chapter 6: Lane Usage and Maneuvers

  12. 12. A solid yellow line on your side of the center marking indicates that:

    Correct answer: You must not pass in that direction

    A solid yellow line in your lane means passing is not allowed in your direction, though you may cross it to turn left.

    Source: Oklahoma Driver Manual, Chapter 4: Signs, Signals and Markings

Take the full Car / Permit practice test

More Car / Permit topics

Practice Signals & Pavement Markings in another state

Every Oklahoma question is written from the official Oklahoma driver handbook and checked against its current edition. DMV Test Free is a free, independent study resource — not affiliated with any DMV or government agency. About DMV Test Free