Skip to main content
DMV Test Free

Utah CDL — General Knowledge practice

Utah CDL — General Knowledge: Penalties & Licensing practice test

The point system, license suspension, provisional-license rules, insurance requirements, and other licensing basics.

Content reviewed against official driver handbooks · August 12, 2026

14 questions · pass with 11 correct. You get instant feedback and an explanation after every answer.

Choose your level

Up to 20 questions on this topic, with feedback after every answer.

Study questions with answers

12 sample Penalties & Licensing questions with the correct answer, a short explanation, and the official handbook reference. Read through them, then take the quiz above.

Show all 12 questions with answers
  1. 1. Testing for the skills exam in a vehicle with an automatic transmission produces which restriction?

    Correct answer: No manual transmission vehicles

    If the skills test is done in an automatic, the license carries the 'E' restriction, which bars the driver from operating a commercial vehicle with a manual gearbox.

    Source: Utah CDL Manual — Section 1: Introduction (Restrictions)

  2. 2. A vehicle built to seat how many people, counting the driver, requires a CDL no matter its weight?

    Correct answer: 16 or more

    The manual places any vehicle designed to carry 16 or more occupants, driver included, under the commercial program regardless of how heavy it is.

    Source: Utah CDL Manual — Section 1: Introduction (CDL Classifications)

  3. 3. Which three segments make up the CDL skills test, taken in the order the manual specifies?

    Correct answer: Vehicle inspection, basic control, and on-road driving

    The skills test runs in order: vehicle inspection, then basic vehicle control, then on-road driving, and each must be passed before the next.

    Source: Utah CDL Manual — Section 1: Introduction (Skills Tests)

  4. 4. What does the CDL restriction code 'L' place on a driver?

    Correct answer: No commercial vehicle equipped with air brakes

    An 'L' restriction bars the holder from operating any commercial vehicle equipped with air brakes, applied when the driver skips or fails the air-brake portion or tests in a vehicle without them.

    Source: Utah CDL Manual — Section 1: Introduction (Restrictions)

  5. 5. How many kinds of endorsements does the manual say may be added to a CDL for special vehicles or cargo?

    Correct answer: Six

    The handbook lists six endorsement categories: doubles/triples, tank, passenger, hazardous materials, the combined hazmat-tank, and school bus.

    Source: Utah CDL Manual — Section 1: Introduction (CDL Endorsements)

  6. 6. When applying for a commercial driving job, how many years of prior driving jobs must you disclose?

    Correct answer: The past 10 years

    Applicants must give the employer details on every driving job held over the previous 10 years.

    Source: Utah CDL Manual — Section 1: Introduction (Other CDL Rules)

  7. 7. How many licenses is a commercial driver permitted to hold at one time?

    Correct answer: One

    A CDL holder may carry only one license; breaking this rule can bring a court fine of up to $5,000 or jail time.

    Source: Utah CDL Manual — Section 1: Introduction (Other CDL Rules)

  8. 8. A driver who earns a Class A CDL is automatically allowed to operate which other groups?

    Correct answer: Both Class B and Class C

    Because the skills for Class A include everything needed for lighter groups, a Class A holder may also drive Class B and Class C vehicles, endorsements aside.

    Source: Utah CDL Manual — Section 1: Introduction (CDL Classifications)

  9. 9. Within how long must you tell your employer after being convicted of a traffic violation other than parking?

    Correct answer: Within 30 days

    The rules require notifying your employer within 30 days of any traffic conviction except parking, regardless of the vehicle you were driving.

    Source: Utah CDL Manual — Section 1: Introduction (Other CDL Rules)

  10. 10. What is the lowest gross vehicle weight rating that forces a driver to hold a CDL for a single truck?

    Correct answer: 26,001 pounds or more

    Any single vehicle rated at 26,001 pounds or more is treated as a commercial motor vehicle, so a commercial license is mandatory to operate it.

    Source: Utah CDL Manual — Section 1: Introduction (CDL Classifications)

  11. 11. How must a commercial driver be secured at all times while the vehicle is in operation?

    Correct answer: Properly restrained by a safety belt

    A safety belt must be worn the whole time you operate a commercial vehicle; unbelted drivers thrown from the cab are far more likely to be killed.

    Source: Utah CDL Manual — Section 1: Introduction (Other CDL Rules)

  12. 12. Which combination fits the Group A commercial class?

    Correct answer: A rig rated at 26,001 pounds or more pulling a unit rated over 10,000 pounds

    Group A is any combination rated 26,001 pounds or more where the trailer or trailers being towed carry a rating above 10,000 pounds.

    Source: Utah CDL Manual — Section 1: Introduction (CDL Classifications)

Take the full CDL — General Knowledge practice test

More CDL — General Knowledge topics

Practice Penalties & Licensing in another state

Every Utah question is written from the official Utah driver handbook and checked against its current edition. DMV Test Free is a free, independent study resource — not affiliated with any DMV or government agency. About DMV Test Free